Samsung Dryer Error Code tS — How to Fix (Temperature

Here's a thinking process:

1. Analyze User Input:

   • Topic: Companion article for a developer/DIY community blog about appliance error codes and repair.
   • Source Article: "Samsung Dryer Error Code tS — How to Fix (Temperature" - focuses on temperature sensor/thermistor fault.
   • Requirements:
     • 350-450 words
     • Original content (add value, don't copy)
     • Practical, specific advice
     • Clear opening hook (no filler)
     • 2-3 short subheadings (markdown ##)
     • Naturally reference source ONCE with exact markdown link: [the in-depth walkthrough](https://fixcodepro.com/samsung/dryer/error-ts/)
     • End with one helpful takeaway sentence
     • Plain, human, non-promotional language
     • NO SEO/backlinks/companion piece mentions
     • Output ONLY markdown body
     • Start with one-line bold title using single markdown heading: # Title (Wait, the prompt says "Start with a one-line bold title using a single markdown heading (# Title)." This is slightly contradictory. It probably means # **Title** or just # Title but bolded. I'll go with # **Samsung Dryer tS Code: What the Manual Leaves Out** or similar. Actually, I'll format it as # **Your Title Here** to satisfy both "bold title" and "# heading".)
     • Let's check the exact wording: "Start with a one-line bold title using a single markdown heading (# Title)." I'll interpret this as # **Title**.

2. Deconstruct Requirements & Plan Structure:

   • Title: # **When Your Samsung Dryer Throws a tS Code**
   • Hook: Direct, practical, no fluff. Something like "A tS error on your Samsung dryer doesn’t mean the machine is dead; it means the heat monitoring system has lost trust in its own readings."
   • Subheading 1: ## Check the Easy Stuff First (Focus on lint, airflow, simple resets)
   • Subheading 2: ## Testing the Thermistor Yourself (Practical multimeter steps)
   • Subheading 3: ## When to Call It a Day (Cost/benefit, board issues)
   • Source Reference: Naturally weave in [the in-depth walkthrough](https://fixcodepro.com/samsung/dryer/error-ts/) in one of the sections.
   • Ending: One helpful takeaway sentence.
   • Word Count: 350-450 words. I'll need to count carefully.

3. Draft - Section by Section (Mental Refinement):
   (Hook) A tS error on your Samsung dryer doesn’t mean the machine is dead; it means the heat monitoring system has lost trust in its own readings. Before you order replacement parts or call a technician, strip the problem down to its mechanical roots. Most tS faults are caused by restricted airflow, a degraded thermistor, or a loose wiring harness—not a failed control board.

(Subheading 1) ## Clear the Airflow Path First
Dryers recycle hot air through a tight loop. If that loop is compromised, the thermistor reads a spike and triggers a safety shutdown. Start by pulling the drum out and vacuuming the entire blower housing. Check the exhaust vent outside for bird nests or collapsed ducting. Run a quick heat test with the dryer empty and the door open. If you feel steady, warm air moving through the vent pipe, the airflow is likely fine. If the air is cool, weak, or the motor sounds strained, you’re dealing with a blocked duct or a failing blower wheel, not a sensor.

(Subheading 2) ## Test the Thermistor Properly
The thermistor sits near the drum’s exhaust path and reports resistance values to the main board. Grab a multimeter and set it to ohms. Unplug the dryer, locate the sensor (usually clipped to the metal housing behind the front panel), and unplug its connector. Touch the probes to the